Do you have a question about the Crumar Seven and is the answer not in the manual?
power rating | 100V AC ~ 240V AC |
---|
output level | selectable -10 dBu, +4 dBu, High Gain (~ +10 dBu) |
---|---|
headphone output max load | 32 ohm |
dimensions with cover | 110, 6 x 44, 7 x 19, 0 cm |
---|---|
dimensions without cover | 110, 6 x 44, 7 x 16, 2 cm |
weight (piano only) | 15 Kg |
weight with cover and legs | 23, 5 Kg |
weight of the legs only | 3, 5 Kg |
box dimensions | 119, 6 x 53, 7 x 27, 0 cm |
box weight | 27 Kg |
Details the voice allocation methods used for different synthesis engines.
Explains how the RGB encoders function as inputs/outputs and display information.
Details the specific parameters controlled by each knob and their associated colors.
Instructions for selecting, recalling, and saving instrument presets across different banks.
How to select and activate effects using the SEL buttons for FX1 and FX2.
How to adjust the instrument's pitch transposition using a key press.
Accessing and controlling Clavi E.P. filter and pickup settings.
Managing MIDI output and reversing sustain pedal behavior.
Configuring global settings like tuning, MIDI channels, and message sending behavior.
Managing user presets and installing/uninstalling sound expansions via USB.
Viewing MIDI CC assignments and setting the Wi-Fi password for secure access.
Procedures for updating the instrument's firmware and restoring factory settings.
Selecting different piano sounds and understanding the Seven logo indicator.
Controls master volume, 3-band EQ, and bypass.
Controls Tremolo, Auto-Panner, LFO Wha-Wha, Pedal Wha-Wha.
Controls Chorus, Phaser, Flanger, and Delay effects.
Emulates various room reverberations with multiple parameters.
Adds a synth pad overlay with level and blend control.
Assigns expression pedal to control various parameters.
Details all available input and output connectors on the rear panel.
Explains System USB and USB MIDI IN/OUT ports.
Describes the location and use of the accessory storage tray.