Crumar Seven User s Manual '
CHAPTER 21. CONNECTIONS.
The following picture shows the connection panel located at the right of the piano.
From top to bottom, left to right:
– LEFT/MONO OUTPUT, RIGHT OUTPUT: these are 1/4” TRS Jack
sockets for the balanced outputs.
– SYSTEM USB: used to accept a USB Thumb Drive to update the
firmware and other functions explained later.
– OUT LEVEL: Line output level selector. Please see next chapter for
more details.
– HEADPHONE: Connect your stereo headphone to this 1/4” TRS
Jack socket.
– POWER SWITCH: don't forget to power on the Seven if you're
feeling yourself somewhat inspired.
– WIFI RESET: this hole hides a button that must only be used to restore the Wi-Fi password in case it's lost. See Chapter 10 for more
details.
– AC SOCKET: Connect the supplied AC power cable here.
– USB MIDI IN-OUT: this is a USB port that carries bi-directional MIDI-USB connection to your computer.
– MIDI OUT: standard DIN5 MIDI output port.
– EXPRESSION: connect your expression pedal here. A 10 K linear pedal is preferred, works with 50 K pedals as well.
– SUSTAIN: connect the sustain pedal to this input.
PLEASE NOTE: We suggest to use Crumar original accessories.
Crumar Seven User's Manual - Page 40
To Next Page
Loading...
