Page 9
Your Responsibilities as an Equipment Owner
Your Crusader Water Quality Management System is manufactured to be efcient and
reliable. To ensure continued performance while keeping your system operating within man-
ufacturer’s specications, the following operating conditions must be ensured by you, the
equipment owner/operator:
Water Pressure Regulator
The inuent water pressure into this water system must be regulated by a code-compliant
pressure-regulating device not to exceed 75 psi.
Power Protection
Power to this system must be supplied by an unswitched 110VAC supply. Surge protection
is mandatory and is to be supplied by you, the equipment owner. The use of a UPS (Uninter-
ruptible Power Supply) is encouraged.
Salt
This water system uses either sodium or potassium salt to clean itself. The brine tank must be
lled with a high quality salt to ensure proper system operation. Consult with your local water
professional to decide on the best salt for your area.
ProGuard
The ProGuard reservoir should be kept full to ensure proper system operation and maximum
efciency. ProGuard works synergistically with the softening media to ensure the very best
water feel and to maximize cleaning power. Check the level of your ProGuard feeder each
time you ll your brine tank with salt.
Periodic Replacement of Media
While built to the highest standards, certain media in your Crusader Water Quality Manage-
ment System will need to be replaced periodically. Replacement intervals vary depending
on your water chemistry and water consumption habits. Consult with your local water spe-
cialist to ensure that you always enjoy the very best water quality.
Crusader Pro, Deluxe, & Enhanced Systems Owner’s Manual 2020
To Next Page
Loading...
Need help?
General