EasyManua.ls Logo

Crystal CRW 400 - Cleaning

Crystal CRW 400
38 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bulaşık Yıkama Makineleri - Professional Dishwashers
Montaj ve Kullanım Kılavuzu - Installation and User's Guide
32
6. Cleaning
Note that in case of failure to make cleaning as set out below, you can damage
yourself, and in addition to this, you can adversely affect part and appearance of
device.
Before cleaning, switch off the device and disconnect the mains electricity
supply.
Do not use chlorine-based chemicals or bleach.
Do not make dishwashing with pressurized water.
Do not wash inside and outside device with hose.
When you notice that dishwashing arms are blocked, unscrew housing
screws and remove arms, and give water to the nozzles with hot water
from reverse, and make them open. Put it under cold water before placing
it to its place.
Use hot water in cleaning filters. Put it under cold water before placing it
to its place.
Be careful to the sharp objects such as glass or plate breaks inside device
during internal cleaning of device.
Make exterior cleaning of device with dry fabric. Then wipe surfaces with
stainless surface cleaners.