20
4. Use
4.8
Status values
The status values can be checked via the remote control by following these steps
Step 1: Keep pressing until you enter the settings verification mode.
Step 2: Press and to check the status values.
Step 3: Press to return to the main screen.
Status values table
N° Description Values
01 Water inlet temperature -30~99°C
02 Water outlet temperature -30~99°C
03 Ambient temperature -30~99°C
04 Air outlet temperature 0~125°C
05 Air inlet temperature -30~99°C
06 Outside coil temperature -30~99°C
07 Inside coil temperature -30~99°C
08 The openness of the expansion valve
09 Reserved
10 Compressor current (A)
11 PCB temperature (°C)
12 Fan motor current (A)
13 Compressor real frequency (Hz)
14 Main PCB current (A)
15 Fan motor speed (RPS)
0~2500, Real=display
value*2
To Next Page
Loading...