27
WARNING: Under normal conditions, a suitable heat pump can heat the water inaswimming
pool by 1°C to 2°C per day. It is therefore quite normal to not feel any temperature difference
in the system when the heat pump is working.
A heated pool must be covered to avoid any loss of heat.
7. Repairs
7.1
Breakdowns and faults
In the event of a problem, the heat pump’s screen displays a fault symbol ERROR instead of temperature
indications. Please consult the table BELOW to find the possible causes of a fault and the actions to be taken.
Fault code examples:
Fault code
E05
To Next Page
Loading...