Crystal XP2i - Pressure Ranges, Display Scales, & Resolution; Part Numbering System

Specications  28
XP2i Operation Manual

PRESSURE RANGES, DISPLAY SCALES, & RESOLUTION
psi bar kPa Overpressure psi
in
H
2
0 inHg mmHg mmH
2
0 kg/cm
2
bar mbar kPa MPa
15PSI 1BAR 100KPA 6.5 x 0.001 0.01 0.001 0.01 1 0.0001 0.0001 0.1 0.01 0.00001
30PSI 2BAR 200KPA 3.0 x 0.001 0.01 0.001 0.1 1 0.0001 0.0001 0.1 0.01 0.00001
100PSI 7BAR 700KPA 2.0 x 0.01 0.1 0.01 0.1
1
0.0001 0.0001 0.1 0.01 0.00001
300PSI 20BAR 2KKPA 2.0 x 0.01 0.1 0.01 1 0.001 0.001 1 0.1 0.0001
500PSI 30BAR 3KKPA 2.0 x 0.01
1
0.1
1
0.001 0.001
1
0.1 0.0001
1KPSI 70BAR 7KKPA 2.0 x 0.1 0.1 0.001 0.001 0.1 0.0001
2KPSI 140BAR 14KKPA 2.0 x 0.1 0.1 0.01 0.01 1 0.001
3KPSI 200BAR 20KKPA 1.5 x 0.1 0.1 0.01 0.01 1 0.001
5KPSI 300BAR 30KKPA 1.5 x 0.1
1
0.01 0.01 1 0.001
10KPSI 700BAR 70KKPA 1.5 x 1 0.01 0.01 1 0.001
15KPSI 1000BAR 100KKPA 1.3 x 1 0.01 0.01 1 0.001
•
Unneeded pressure units may be disabled via the RS-232 connector using CongXP software.
•
kPa models can display pressure in kPa, MPa, and bar (or mbar) only. psi and bar models can display all available units.
•
XP2i will indicate pressure up to 10% above Range Pressure. Above 110%, the XP2i display will ash, indicating that the applied pressure exceeds the cali-
brated pressure range. If the calibrated pressure range is exceeded, the pressure displayed may not be accurate.
•
Absolute pressure XP2i's are designated by a “B” in front of “XP2i” in the part number.
•
An Absolute pressure version is available only on XP2is and XP2i-DDs with ranges of 2000 psi and higher.

PART NUMBERING SYSTEM
P/N Model Dual Display?
Accuracy
Adapter:
Type
Connection:
Location
Panel Mount? Data-logging?
XP2I
No .....(omit) 0.1% of reading ...(omit) NPT .......(omit) Bottom ..(omit) No .....(omit) No ..... (omit)
Yes .......-DD 0.02% of FS ..........-S2 G 1/4 B ..... -BSP Back ........-RP Yes ........ -F4 Yes ........ -DL
0.05% of FS ..........-S5 M20x1.5 ...-M20
"omit" for -F4
panel mount
Includes
-RP option
SAMPLE PART NUMBERS
300PSIXP2I ............300 psi standard gauge
200BARXP2I-DD .......200 bar dual-line display gauge
2KPSIBXP2I ............2000 psi Absolute gauge
700KPAXP2I-S2 .......700 kPa gauge with 0.02% of FS accuracy
-RP option Rear Pressure Fitting -F4 option Panel Mount Flange
CPF Adapter Fitting is not included.