Need help?Do you have a question about the Crystal XP2i and is the answer not in the manual?
General| Brand | Crystal |
|---|---|
| Model | XP2i |
| Category | Test Equipment |
| Language | English |
Provides an overview of the XP2i Digital Test Gauge and its features.
Explains how to cycle through available pressure measurement units.
Describes how to display peak, valley, PSV, and average pressure readings.
How to clear recorded peak high and peak low pressure values.
How to zero the gauge and clear the zero value.
How to subtract a constant value from the true pressure reading.
How to measure and display pressure change per minute.
How to display pressure difference between two gauges.
Explains the auto shut-off feature and how to disable it.
How to control the display backlight brightness and duration.
How to measure vacuum and limitations for continuous use.
How to check and change water density for inches of water unit.
What happens when the gauge exceeds its rated pressure range.
Mode for PSV, PRV, and Rupture Disc testing.
How the battery level is indicated.
Instructions for replacing the gauge batteries.
How to reset the XP2i gauge.
Overview of remote control via command language.
Introduces the optional data logging mode and its capabilities.
Defines key terms used in DataLoggerXP software and operation.
Outlines a common workflow for using DataLoggerXP.
Instructions for installing the DataLoggerXP software.
How to authorize the gauge for full data point recording capability.
Describes the functional areas of the DataLoggerXP application.
How to configure software options like serial port detection.
Steps to connect the XP2i gauge to the computer.
How to set and manage password protection for data logging.
How to set logging interval and logging type.
Controls the frequency of measurements during data logging.
Defines how data is recorded (Actual, Average, etc.).
How to manage downloaded data.
Steps to download recorded data from the gauge.
How to view recorded data runs in the Data View dialog.
How to save recorded data runs to a file.
How to save data in Excel workbook or text file format.
How to erase all logged data from the gauge's memory.
Information on the maximum data points that can be recorded.
Step-by-step guide to starting and stopping data recording.
Explains button combinations for data logging control.
How to set logging mode and interval using the keypad.
Detailed steps for setting the logging interval via keypad.
How the units button displays logging state and controls runs.
How to clear the logging memory using button combination.
How to record readings when logging type is 'On Demand'.
How to use ULP mode for extended logging periods.
Describes gauge behavior during data logging.
How resets or battery changes affect logged data and clock.
How DataLoggerXP interfaces with Excel for reporting.
How to password protect Excel workbooks.
How data is copied to Excel and references are used.
How to select and set default Excel template files.
Details on weight, housing, rating, and keypad material.
Technical drawings and dimensions of the gauge enclosure.
Information on optional fitting adapters for sensors.
Where to find the serial number on the XP2i gauge.
Explanation of the 6-digit serial number format.
Details on linearity, hysteresis, repeatability, temp, and stability.
Specific accuracy figures for vacuum to full scale ranges.
Operating and storage temperature ranges.
Lists compatible liquids and gases.
Conversion factors for various pressure units.
Details on communication and pressure connection types.
Information on screen size, digits, and readability.
Details on wetted materials and diaphragm seal fluid.
Information on battery type, life, and indicator.
Table detailing pressure ranges, overpressure limits, and resolution.
Explains how XP2i part numbers are structured.
Details intrinsic safety approvals for hazardous environments.
Provides crucial warnings for using the XP2i in hazardous areas.
Lists international standards and directives the XP2i complies with.
Safety and battery instructions in Czech, German, English, Spanish, French, Italian, Dutch, Polish, Finnish.
Details battery approval requirements for CSA certification.
Addresses common issues, unstable readings, non-repeatability, and error displays.
Covers factory adjustment, frequency, and span factor calibration.
Details ConfigXP software, replacement parts, and available accessories.
Procedure for obtaining factory service and return authorization.
Lists third-party trademarks mentioned in the manual.
Details the warranty terms and conditions for the XP2i.
To Next Page