EasyManuals Logo

CS Instruments LD 500 Short User Guide

CS Instruments LD 500
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
LD 500_SHORT BAL_V2.03 EN Page 2 of 20
1. Safety instructions
About this document
Read this document carefully and familiarise yourself with the product before
use. Pay particular attention to the safety instructions and warnings to prevent
personal injury and product damage.
Keep this document close at hand so you can refer to it if necessary.
Pass the document on to future users of the product.
Ensuring safety
Only use the product in an appropriate manner and for its intended purpose and
within the parameters specified in the technical data. Do not use force.
Never use the device to measure on or in the vicinity of live parts!
o Maintain an adequate safety distance when performing leak detection
operations on electrical systems to avoid dangerous electric shocks!
Avoid any direct contact with hot or rotating parts.
Always switch on the device first before putting on the headset! At high signal
levels (headset bar chart in the red zone), the volume level may also be similarly
high.
Never point the integrated laser directly at the eyes! Strictly avoid directly ex-
posing the eyes of humans and animals!
Laser module: corresponds to DIN EN 60825-1: 2015-07 Class 2 (< 1 mW)
Observe the prescribed storage and operating temperatures.
Improper handling or use of force leads to loss of warranty.
Any form of tampering with the device that does not conform with its desig-
nated use and is not described in the procedures will forfeit any warranty and
exclude liability.
The device is exclusively designed for the intended use as described here.
Protecting the environment
Dispose of defective/empty batteries in accordance with the relevant legal provi-
sions.
At the end of its useful life, dispose of the product at the separate collection
point specified for electrical and electronic equipment (observe local regulations)
or return the product to CS Instruments GmbH & Co. KG for disposal.
CS Instruments GmbH & Co. KG offers no guarantee in relation to the suitability for any other purpose
and accepts no liability for any printing errors in this operation manual. The same applies to conse-
quential damage in connection with the delivery, capacity or use of this device.

Other manuals for CS Instruments LD 500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CS Instruments LD 500 and is the answer not in the manual?

CS Instruments LD 500 Specifications

General IconGeneral
BrandCS Instruments
ModelLD 500
CategorySecurity Sensors
LanguageEnglish