APPENDIX 3
Specification
Models CS2000 Stand Alone
Dimensions (h x w x d) 120 x 182 x 62 mm
Weight 450 grams
Telephone Path PSTN technology. CTR21 approved.
Radio Path GSM
Abort Facility Built In
Expansion 9 to 16 inputs using CS1050
Power Requirement 13.0 - 13.8volts DC, 0.1volt max ripple
Current Consumbtion 75mA quiescent, 150mA operating
Hourly test current 800mA for 1/10 second.
Low Battery 10.8-11.0 volts falling, 11.8-12.0v recovery
Outputs CS2000, 2 changeover relays (24v 1A contacts)
8 additional outputs using CS1050
Start Inputs Max +15 volt, Min +3.5 volts DC
Temperature -20C to +60C transit, -4C to +50C operating
Humidity 0 - 80% non-condensing
Mounting Any orientation
Warranty 1 years
43
Regulatory Constraints
Before attempting to install a DualCom, the installer must be aware that the
CS2000 range of DualCom products may only be installed by a professional
installer.
The Ringer Equivalence Number (REN) of the apparatus is 1.0. The sum of
RENs of the individual items connected to one PSTN line should not exceed 4.
To Next Page
Loading...
General