CSL Emizon TCD - Assigning Static Ip Address

To Next Page

To Previous Page

Pins 1 to 16 can be set to the following options via Online Maintenance Software, The

Emizon TCD Phone App or by calling the CSL Technical Support.

• Positive Applied

• Positive Removed

• Set/Unset (Positive Applied)

• Set/Unset (Positive Removed)

• Disabled

ASSIGNING STATIC IP ADDRESS

This is for when no other Path is available.

To assign a static IP address, a Laptop is required. A network connection is not

required. The minimum ﬁrmware must be 1.5.4.

THE TCD MUST BE DE-ACTIVATED EITHER BY THE ARC OR BY CSL PRIOR TO ASSIGNING

A STATIC IP ADDRESS.

The TCD is set to DHCP by default. If a static IP is required, using an Ethernet cable,

connect directly from a laptop to the TCD Ethernet port and follow the steps below.

1 - Open browser & go to 165.254.37.93

2- At Pages available: select IP Address Conﬁguration

3 - Select Fixed IP Address, enter the Static details (IP, Netmask and Gateway) and

press Submit