CSL Emizon TCD - Page 2

Emizon TCD
Introduction
IP/GPRS GPRS/PSTN & IP/PSTN - For alarm control panels using up to 16 pins, RS232,
RS485 and Dial Capture.
For compliance with EN alarm signalling Grade 2, 3, 4, BS 8418 for CCTV monitoring
Emizon TCD is the always on, Dual-path, Alarm and CCTV communications
monitoring device for Broadband, GPRS and PSTN networks. This guide contains a
step-by-step guide to the installation and commissioning of the TCD, the gateway to
the Emizon IP service.
COMPATIBLE WITH THE FOLLOWING
MAKE MODEL
Bosch Easy Series, Solution Series 16.64
Castle Euro
Cooper Menvier
Scantronic 95EN, Menvier M series (not T900), ION
Range / Mevier
30, 40, 100 & 300, Menvier M series (not T900),
ION Range / Menvier
30, 40, 100 & 300
GE
ATS 200X/300X/400X, Aritech CD, ATS
200X/300X/400X Dial Capture,
ATS 200X/300X/400X Dial Capture, ATS Advance
Dial Capture
Guardall All with RS232 Serial Port
Honeywell
Galaxy G2, Galaxy G3/Dimension, Galaxy (Dial
Capture), Galaxy Flex
3 (Dial Capture), Galaxy G500, G512 and Flex 1 &
2, Galaxy Flex 3
RS485
DSC All
RISCO Prosys, Agility Lightsys
Gardtec 595 Series
Siemens SPC Ethernet
Texecom Premier, Premier Elite
HKC SecureWave Range
Caddx Nx,4,8,16 Dial-Capture, Via NX585/Serial Interface
GE Interlogic Tecom System Challenger Version 8
Inner Range Concept 3000/4000
Paradox SP/MG (Dial Capture)
Satel Integra (Dial Capture), Satel (Integra SIA over IP)
NOX DC09 SIA over IP