To Next PageTo Next Page
Need help?Do you have a question about the CST/BERGER ALH and is the answer not in the manual?
General| Laser Diode | 635 nm |
|---|---|
| Power Supply | 4 AA batteries |
| Waterproof | IP54 |
| Dustproof | IP54 |
| Battery Type | 4 AA batteries |
| Laser Class | Class II |
| Operating Temperature | -10°C to +45°C |
Detailed safety instructions and warnings regarding laser beam exposure and product usage.
Visual representations of buttons and indicators used on the laser level.
Procedure for establishing and checking a reference point for accurate measurements.
Instructions for using the laser level in typical construction site scenarios.
Steps for installing ceiling grids using the laser level and wall mount.
Guidelines for using the laser level in a horizontal, laydown position.
Process for enabling the self-leveling function and initial setup of the laser.
How to enable and use the cross-axis leveling feature for specific applications.
Instructions for operating the laser in a vertical or laydown orientation.
Using the laser to create a defined scanning beam for precise alignment.
Operating the laser to create a stationary dot for straight-line references.
How the instrument automatically re-levels if disturbed.
Explanation of axis errors and how to resolve them when the instrument is out of level.
Controlling the instrument's reaction to being moved out of level.
Detailed guidance on setting dual or single axis grades for various site applications.
Fine-tuning the laser line position without moving the instrument itself.
Critical safety warnings and guidelines for handling batteries and electrical components.
Procedure to test and verify the accuracy of the laser's X-axis calibration.
Testing the Z-axis calibration when the instrument is in a laydown position.
Calibrating the Z-axis when the laser is positioned horizontally.
Guidelines for proper disposal of batteries and recycling of materials.
Information regarding the product's three-year warranty and contact details.
List of key features and components of the electronic laser detector.
Instructions on how to power on and use the laser detector with a rotary laser.
Adjusting the audio feedback volume and tone for the laser detector.
Understanding the LED indicators for detecting laser position and level status.
Details on operating the remote control for ALHV and ALHV-G models.
