To Next PageTo Next Page
Need help?Do you have a question about the CST/BERGER ALHV and is the answer not in the manual?
Covers essential safety guidelines, warnings, and regulatory compliance.
Detailed instructions and warnings regarding safe laser operation and eye protection.
Steps for self-leveling, cross-axis, and plumbing/laydown modes.
Steps for calibrating the laser in upright position for X axis.
Steps for calibrating ALHV/ALGR in upright position for X/Y axes.
Calibrating the Y axis in upright position for all models.
Instructions for calibrating the laser in laydown position for Z axis.
Calibrating ALGR in laydown position for Z axis.
Basic tests and solutions for performance problems.
Covers essential safety guidelines, warnings, and regulatory compliance.
Detailed instructions and warnings regarding safe laser operation and eye protection.
Steps for self-leveling, cross-axis, and plumbing/laydown modes.
Steps for calibrating the laser in upright position for X axis.
Steps for calibrating ALHV/ALGR in upright position for X/Y axes.
Calibrating the Y axis in upright position for all models.
Instructions for calibrating the laser in laydown position for Z axis.
Calibrating ALGR in laydown position for Z axis.
Basic tests and solutions for performance problems.
General| Self-Leveling Range | ±5 degrees |
|---|---|
| Operating Temperature | 14°F to 122°F (-10°C to 50°C) |
| Water Resistance | IP54 |
| Rotation Speed | 600 RPM |
| Laser Diode | 635nm, Class II |
| Outdoor Use | Yes |
| Accuracy | ±1/8 inch at 30 feet |
| Power Supply | 4 AA batteries |
| Warranty | 2-Year Limited |
