To Next PageTo Next Page
Need help?Do you have a question about the CST/BERGER DGT 10 and is the answer not in the manual?
General| Type | Rotary Laser Level |
|---|---|
| Laser Color | Red |
| Self-Leveling Range | ±5° |
| IP Rating | IP54 |
| Range | 300 m with detector |
| Laser Class | II |
| Laser Diode | 635 nm |
| Operating Temperature | -10°C to +50°C (14°F to 122°F) |
Ensure safety by having the measuring tool repaired by qualified specialists using original spare parts.
Avoid operating in explosive environments with flammable liquids, gases, or dusts due to ignition risk.
The tool measures horizontal and vertical angles and distances precisely.
Follow steps to remove lid, open compartment, insert batteries correctly, and close securely.
Learn how to securely attach and detach the measuring tool to the tribrach using the thumbscrew.
Press the On/Off button; the display shows all symbols briefly before showing operational status.
Fasten the tool on a tripod, level it using bubble vials, and align with the optical plummet.
Perform coarse and fine alignment of the telescope with the target horizontally and vertically.
Zero the horizontal circle, aim at target B from point A, and read the angle indicated.
