CST/BERGER ALHV-G - User Manual

Electronic Self-Leveling
Electronic Self-Leveling
Rotary Laser
Rotary Laser
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
Manuale di Istruzioni
Bedienungsanleitung
Instruções de Utilização
Electronic Self-Leveling
Rotary Laser
models:
ALH, ALHV, ALHV-G, ALGR
ALH
ALHV(-G)
ALGR
3
Electronic Self-Leveling
Rotary Laser
www.cstberger.com
3

Summary

SAFETY AND CERTIFICATIONS

LASER SAFETY

OPERATING INSTRUCTIONS

General Construction Applications

Instructions for typical construction site use.

OPERATION MODES

Leveling and Cross Axis

Process of auto-leveling and cross-axis leveling.

Auto Level and Anti-Drift Systems

Controls for auto leveling and drift detection.

Manual Grade - Single Axis

Allows setting a single grade slope.

Manual Grade - Dual Axis

Allows setting dual axis grade slopes.

Grade Mode Anti-Drift and Line Position

ADS in grade mode and fine-tuning line position.

Error Handling

Information on re-leveling and axis drive errors.

ALGR Grade Mode

Setting dual or single axis grades on the ALGR model.

BATTERY AND SAFETY

Replacing Battery

Procedure for replacing batteries and electrical safety.

Rechargeable Battery Pack

CALIBRATION PROCEDURES

Upright Position Peg Test - X axis

Upright Position Calibration- X;Y axis

Y axis Test;Calibration & Z axis Test

Z axis Calibration (ALGR) & Maintenance

Upright Position Calibration- X axis

Laydown Position Calibration - Z axis

SPECIFICATIONS

TROUBLESHOOTING

WARRANTY

CST/BERGER ALHV-G Specifications