35
ENGLISH
the parental setting appears. Move the cursor with the
buttons PRO+ or PRO- to the desired channel. Press
the LIST/OK button once to select it and a second
time to cancel the selection. Carry out these steps
with each channel that you wish to block. Press the
EXIT button three times; the system stores the data
and returns to the normal television programme.
Note:
In order to block the channels you have to activate the
channel lock function.
It is only possible to watch blocked channels by
entering the correct PIN code. Enter the four-fi gure
number and confi rm by pressing the LIST/OK button.
Note:
The PIN code for this set when it leaves the
factory is 9999.
Changing the PIN Code
In the parental control menu use the buttons PRO+
or PRO- to select the item „Change PIN“. Confi rm
by pressing the LIST/OK button. Enter the old PIN
and confi rm by pressing the LIST/OK button. Now
enter your new PIN and press the LIST/OK button to
confi rm. Now re-enter your new PIN and confi rm by
pressing the LIST/OK button twice.
The message „PIN code changed“ appears on the
screen. Press the LIST/OK button to return to the
“Parental Control” menu. Press the EXIT button twice
to return to the normal television programme.
Important:
Please remember your new code as after the change
it applies to all password requests.
If you have forgotten your personal code you can as-
sign a new one with the help of the Master-Password
„9999“.
7.10 Games Menu
Press the MENU button to display the main menu.
Move the cursor with the buttons PRO+ or PRO- to
the submenu „Game“. Press the LIST/OK button to
call up the games menu.
Use the buttons PRO+ or PRO- to select a game.
Press the LIST/OK button to start the game. With
the EXIT button you can return to the “Game” menu.
Then press the EXIT button twice to return to the
normal television programme.
7.11 Factory Settings
Press the MENU button to display the main menu.
Move the cursor with the buttons PRO+ or PRO- to
the submenu „Accessory“. Press the LIST/OK button
to call up the accessories menu.
In the accessories menu use the buttons PRO+ or
PRO- to select the item „Factory Default“. Confi rm by
pressing the LIST/OK button.
05-CTV 722 LCD_GB Neu2 35 20.02.2006, 9:59:05 Uhr
To Next Page
Loading...
General