10 • EN
LEAD-ACID
CHARGING PROGRAMS
Settings are made by pressing the MODE-button. After about
two seconds the charger activates the selected program. The
selected program will be restarted next time the charger is
connected.
The table explains the different Charging
Programs:
Program Explanation
NORMAL
Normal battery program 14.4V/2.3A
Only for lead-acid batteries.
RECOND
Recond program 15.8V/0.9A
Use to restore capacity to WET and Ca/Ca
batteries. Recond your battery once per
year and after deep discharge to maximize
lifetime and capacity.
READY TO USE
The table shows the estimated time for empty battery to 80%
charge.
BATTERY CAPACITY
(Ah)
TIME TO 80%
CHARGED
5Ah 2h
10Ah 4h
15Ah 6h
20Ah 7h
25Ah 9h
To Next Page
Loading...
