To Next PageTo Next Page
Need help?Do you have a question about the CTM 3600-PA and is the answer not in the manual?
General| Brand | CTM |
|---|---|
| Model | 3600-PA |
| Category | Label Maker |
| Language | English |
Diagram illustrating the path of the label material through the applicator.
Glossary of technical terms used in the manual for clarity.
Explanation of the applicator's control panel interface and its functions.
Details on the connectors and ports located on the rear of the applicator.
Step-by-step instructions for assembling and configuring the applicator.
Procedures for setting up the applicator based on product characteristics.
Information on system signals, alarms, and their meanings.
Guidelines for routine cleaning, inspection, and upkeep of the applicator.
Configuration settings specific to Sato printers.
Configuration settings specific to Zebra printers.
Configuration settings specific to Datamax printers.
Label adhesive that can cause inconsistent positioning on the label pad.
Device that removes debris from the air supply for cleaner operation.
An alarm that halts applicator operation, indicating a serious fault.
Component that regulates unwind tension by releasing the brake.
Nose assembly that aids dispensing with different label lengths for higher rates.
Aluminum block under the tamp slide that channels vacuum and air blast.
Part supporting the label before application, usually made of delrin.
