EasyManua.ls Logo

CTM HS-2800 - Tire Pressure (Air-Filled Tires); Tire Tread; Electrical Connections; Hardware

CTM HS-2800
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User's ManualHS-2800
Figure 24
Figure 24
17
TIRE PRESSURE (for air-filled tires only):
The condition of tires and maintenance of specified tire pressures not only influence
t
ire life, but also effect road safety to a very considerable extent. Incorrect pressure is
o
ften a cause of tire problems and could result in an accident. The recommended tire
p
ressure is 35 psi.
TIRE TREAD:
Inspect the tires frequently for any signs of damage, such as unusual wearing or insufficient
tread depth. Tread depth should not be allowed to drop below 1 mm.
ELECTRICAL CONNECTIONS:.
Make sure battery terminals and all plug connectors are secured and firmly attached. If
b
attery terminals are corroded, please contact your dealer for replacement.
HARDWARE:
Check that all hardwares and are securely fastened. Replace any missing hardware by
contacting your dealer.
SEAT TOWERS:
Total of three-seat towers hold seat in place. Before removing seat towers, seat itself
m
ust be removed. (Follow directions in disassembling your power chair on page 15).
M
ake sure seat is removed from seat towers by pushing locking mechanism on front
t
ower. The towers are removed by pulling out guide pins. Clean seat towers with a damp
c
loth and do not lubricate.
Additional Information
STORING:
Also between uses, your power chair is best stored in a dry location at room temperature.

Related product manuals