CTM HS-2800 - User Manual

Questions and Answers

K
Kelly PowersAug 17, 2025
What to do if my CTM Wheelchair won't move when powered on?
- T
  Taylor Bailey DDSAug 17, 2025
  If your CTM Wheelchair is not moving when turned on, begin by checking the battery gauge on the joystick to ensure all LED lights are illuminated. Also, verify that the Self-Diagnostic Warning Light is steady. If it's flashing, consult page 18 for problem identification. Ensure all electrical connections are secure and that the batteries are correctly connected, referring to 'Installation of Batteries' for guidance.
M
Mr. Alan Hunter PhDAug 20, 2025
Why am I getting a SHARK Communications Fault on my CTM Wheelchair?
- H
  Holly DoyleAug 20, 2025
  If you are experiencing a SHARK Communications Fault with your CTM Wheelchair, ensure the battery voltage is greater than 17V. Check the SHARK Bus Cable. If problems persist, you may need to replace the SHARK Power Module or the SHARK Remote.
H
Hannah TuckerAug 22, 2025
How to fix a User Fault on my CTM Wheelchair?
- G
  Gregory LewisAug 22, 2025
  To resolve a User Fault on your CTM Wheelchair, which may be due to a stall timeout or user error, release the joystick to the neutral position and try again.
D
David PhelpsAug 26, 2025
What to do if I have a Battery Fault on my CTM Wheelchair?
- J
  Jonathan MontoyaAug 26, 2025
  If you are facing a Battery Fault with your CTM Wheelchair, try charging the batteries. If the issue persists, the batteries may need replacement. Inspect the batteries and cabling for any damage or loose connections.
D
Deanna PerezAug 28, 2025
How do I troubleshoot a Left Motor Fault on my CTM Wheelchair?
- J
  jhayesAug 28, 2025
  To address a Left Motor Fault in your CTM Wheelchair, check the left motor itself, along with all connections and cabling associated with it.
S
Steven WhiteAug 31, 2025
How do I troubleshoot a Right Motor Fault on my CTM Wheelchair?
- P
  Patricia SchneiderAug 31, 2025
  To address a Right Motor Fault in your CTM Wheelchair, check the right motor, its connections, and the associated cabling.
J
Joe CarterSep 3, 2025
What should I check for a Left Park Brake Fault on my CTM Wheelchair?
- A
  alexandermooreSep 3, 2025
  To resolve a Left Park Brake Fault on your CTM Wheelchair, check the left park brake, its connections, and cabling.
H
Henry TaylorSep 5, 2025
What should I check for a Right Park Brake Fault on my CTM Wheelchair?
- M
  Mrs. Cynthia SchaeferSep 5, 2025
  To resolve a Right Park Brake Fault on your CTM Wheelchair, check the right park brake, its connections, and cabling.
S
Stephanie McguireSep 8, 2025
What to do if I get a SHARK Remote Fault on my CTM Wheelchair?
- J
  Joseph JacobsonSep 8, 2025
  If you encounter a SHARK Remote Fault with your CTM Wheelchair, check the SHARK Communications Bus connections and wiring. If the problem persists, consider replacing the remote.
S
Susan StevensSep 12, 2025
What should I do for a SHARK Power Module Fault on my CTM Wheelchair?
- O
  Olivia LawsonSep 12, 2025
  If you are experiencing a SHARK Power Module Fault on your CTM Wheelchair, check all SHARK connections and wiring. If the issue continues, replace the Power Module.