CTM HS-2800 - Care and Maintenance; Body Shroud; Seat and Armrests; Seat Belt

User's ManualHS-2800
An authorized dealer should handle all maintenance and repair associating
with electronics, batteries, motor parts, and tires. Here are the guidelines
that can be followed by authorized dealer.
16
CARE AND MAINTENANCE
Taking care of your power chair will keep it in top-notch condition. It is recommended
t
hat you have your dealer to provide a thorough inspection and servicing. Regular cleaning
w
ill reveal loose or worn parts and enhance the smooth operation of your powered scooter.
R
outine maintenance will extend the life and efficiency of your power scooter. Here are
f
ew maintenance guidelines:
BODY SHROUD:
If your power chair is dirty, use a damp or lightly soapy cloth to wipe it down. Do not use
r
unning water to wash or rinse power chair in order to protect electrical parts. Polish
w
ith an automotive liquid polish.
SEAT AND ARMRESTS:
The seat material used by C.T.M. is of high quality and will remain in good condition for
m
any years if treated responsibly. Using a damp cloth helps clean the upholstery greatly.
P
lease note that using power chair outdoors could lead to sun damage to upholstery
m
aterial, and normal wearing and tearing is not covered under warranty.
SEAT BELT:
A
damp cloth with mild soapsuds should only be used to clean seat belts. Wipe seat belts
g
ently and remove residue. Do not use any chemical products to clean seat belts as fabric
w
ill be weakened.
FLAT SPOT (for solid tires only):
During storage period, a flat spot may occur to solid tires. Weather conditions and storage
period determine the condition of flat spots. By driving power chair 20 to 30 minutes, flat
spots could be eliminated.