Picture 9 Picture 10
① Press the power button. The indicator light on the light board will flash red, and the
camera will constantly sound a chime for network configuration.
② Please place your mobile phone and camera next to the router for operation. Open
the WiFi setting interface of the mobile phone, find the hotspot with the name
IPCAM-XXXXXX sent by the camera, click connect, and the password is 01234567.
This WiFi is the camera hotspot. After the phone is connected, it will prompt "The
current WiFi has no Internet connection", please choose to continue using(Picture 9 to
Picture 10)
③ Open the CTRONICS APP, adding the camera according to the following pictures,
and the camera status in the list will display Online after the addition is successful.(Pic-
ture 11 to Picture 13)
3.2 Method 2:Configure network via hotspot
-www.ctronics-tech.com-
-05-
To Next Page
Loading...
Need help?
General
