EasyManuals Logo

Cub Cadet 1027 User Manual

Cub Cadet 1027
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
For repairs beyond those listed in the Trouble-Shooting chart above, please contact an authorized
service dealer or call Cub Cadet Customer Service at 1- (800)-528-1009.
Engine cranks but will
not start
1. Throttle/choke not in starting position.
2. No fuel to the carburetor
3. Fuel line or in-line fuel filter plugged
4. No spark to spark plug
5. Faulty spark plug
6. Dirty air cleaner
1. Check owner's guide for correct position
for throttle control/choke for starting.
2. Gasoline tank empty. Fill with gasoline.
3. Remove and clean fuel line. Replace filter if
necessary.
4. Spark plug lead disconnected. Connect
lead. Hold spark plug lead away from
engine block about 1/8". Crank engine.
There should be a spark. If not, have
engine repaired at authorized engine
service dealer.
5. To test, remove spark plug. Attach spark
plug lead to spark plug. Ground the spark
plug body against the engine block. Crank
the engine. The spark plug should fire at
the electrode. Replace if it does not.
6. If the air cleaner is dirty, the engine may
not start. Clean or replace as
recommended by the engine
manufacturer.
Engine smokes 1. Engine oil has been overfilled
2. Dipstick not seated or broken
3. Engine loses crankcase vacuum
1. Check oil level.
2. Replace defective part.
3. Engine breather defective. Replace.
Trouble Possible Cause Remedial Action

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet 1027 and is the answer not in the manual?

Cub Cadet 1027 Specifications

General IconGeneral
BrandCub Cadet
Model1027
CategoryLawn Mower
LanguageEnglish

Related product manuals