Cub Cadet 108 User Manual

LUBRICATION GUIDE
International Cub Cadet 86, 108 and 128 Tractors
-Periodic
Transmission
Check the oil level periodically. Keep the lubricant up the
the level plug (6) on the rear of the transmission case.
6 -Oil level and filler plug.
7 -Oil drain plug.
Creeper drive housing
Check the oil level periodically. Keep the lubricant up to
the level plug (8) on the left side of the creeper drivehousing.
8 -Level plug.
9 -Breather and filler plug.
10 -Drain plug.
Once a year, apply two strokes of the lubricator, using I H251
H EP grease or equivalent #2 multi-purpose lithium
grease.
11 -Steering gear housing.
NOTE: To locate the lubrication fitting, remove bottom
shield and turn the front wheets to the maximum right turn
position. Then reach up under the right side of the tractor
frame to locate the fitting.
Lubricate the clutch pedal shaft and linkage with eight or
ten drops of engine oil.
Miscellaneous
38

Cub Cadet 108 Specifications

General

Brand	Cub Cadet
Model	108
Category	Tractor
Language	English