Need help?Do you have a question about the Cub Cadet 3654, 3660 and is the answer not in the manual?
General| Brand | Cub Cadet |
|---|---|
| Model | 3654, 3660 |
| Category | Lawn Mower |
| Language | English |
General safety guidelines for operating and maintaining the mower, emphasizing operator training and protective gear.
Critical safety measures for handling flammable fuel, including storage, filling, and preventing ignition sources.
Safe operating practices during mowing, such as keeping bystanders away, avoiding hazards, and proper turning techniques.
Explains the function of key controls like ignition, throttle, steering levers, and blade clutch for mower operation.
Details the operation of the parking brake, its function in starting the engine, and its engagement for parking.
Describes how to operate the deck lift handle for raising and lowering the mowing deck for transport and cutting.
Explains the function and operation of the fuel shutoff valve to control fuel flow to the engine.
Details how to adjust the operator's seat forward and backward for optimal positioning and comfort.
Describes the function of the tachometer and hour meter for monitoring engine RPM and operating time.
Explains how to use the choke lever for starting the engine, especially when cold.
Covers initial checks of fluid levels, tire pressure, and belt tension before operating the mower.
Covers checking fuel, engine oil, hydraulic oil levels, and tire pressure before operation.
Emphasizes checking all nuts, bolts, and screws for tightness to ensure structural integrity and safety.
Details how to check and inspect deck drive belts for wear, fraying, and proper tension.
Guides on adjusting the mowing deck's angle (pitch) for optimal cutting performance and grass handling.
Provides instructions for leveling the mowing deck side-to-side to ensure an even cut across the mowing width.
Covers initial break-in procedures and general guidelines for operating the mower safely and effectively.
Details the step-by-step process for safely starting the mower's engine, including safety interlocks.
Explains how to operate the zero-turn mower, including forward, backward, and turning movements.
Describes the correct procedure for safely parking the mower, including shutting off the engine and engaging the brake.
Covers procedures for removing, changing blades, sharpening blades, and changing drive belts for the mower deck.
Covers adding, draining, and maintaining hydraulic oil and filters for system longevity.
Covers battery maintenance, storage, installation, jump starting, fuses, and safety switch checks.
Covers tire inflation pressure, repair of leaking tires, and adjustment for mower creeping.
Covers adjustments and repair of the parking brake system for proper functionality.
Provides comprehensive steps for preparing the mower for long-term storage, including cleaning and fluid management.
Details the procedures for preparing the mower after storage, including battery checks and fluid refills.
Lists essential daily checks to perform before starting the engine and after mowing.
Outlines maintenance tasks to be performed every 25 operating hours.
Specifies maintenance tasks required weekly or every 50 operating hours.
Details engine oil change intervals, especially for heavy-duty operation.
Explains the procedure for cleaning or replacing the engine's air cleaner element.
Specifies intervals for changing hydraulic oil and filter, including initial 50-hour service.
Guides on oiling various wear points according to the Oiling Chart for proper lubrication.
Outlines maintenance tasks that need to be performed every 100 operating hours.
Lists maintenance checks to be performed on a yearly basis.
To Next Page