Cub Cadet 5252

CUB CADET LLC P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 [www.cubcadet.com]
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning
: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved
forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark
arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective
working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public
Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the
muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box
361131 Cleveland, Ohio 44136-0019.
Operator’s Manual
PRINTED IN U.S.A. FORM NO. 769-00867B
(4/04)
TRACTOR
MODEL 5252
SERIES 5000
w/60" MOWER DECK
ECO 16878

Cub Cadet 5252 Specifications

General

Engine Power	25 HP
Cylinders	2
Fuel Type	Gasoline
Transmission Type	Hydrostatic
Drive	2WD
PTO	Independent
PTO Power	19.5 HP
Turning Radius	18 inches
Steering	Power
Deck Material	Steel
Warranty	3 year / 120 hour (residential)

Summary

Important Safe Operation Practices

Safety Labels Overview

Section 1: Controls and Features

Primary Driving and Engine Controls

Details for steering, throttle, ignition, PTO, pedals, parking brake, differential lock, and choke.

Operator Comfort and Attachment Controls

Instrument Panel Functionality

Section 2: Operation

Safety Features and Systems

Information on ROPS, seat belts, and safety interlock preventing unsafe operation.

Fueling the Tractor

Starting and Stopping the Engine

Step-by-step instructions for safely starting and shutting down the tractor engine.

Driving the Tractor

Guidelines for operating the tractor in forward and reverse, including stopping.

Using Forward and Reverse Pedals

HiLo Range Shift Lever Operation

Slope Operation and Differential Lock

Safety and techniques for slopes, and using the differential lock for traction.

Hydraulic Lift Lever Operation

PTO Engagement and Override

Steps for engaging PTO and enabling operation while reversing.

Three Point Hitch Operation

Section 3: Adjustments

Seat and Seat Belt Adjustments

Procedures for adjusting the operator's seat and seat belt for comfort and safety.

Three Point Hitch Adjustments

Brake Adjustment

Section 4: Tractor Maintenance

Lubrication Table and Procedures

Details on lubrication points, types of lubricants, and intervals for maintenance.

Maintenance Schedule Intervals

Table outlining required maintenance operations and their service intervals.

Accessing the Engine Compartment

General Battery Information

Important safety and handling information for the tractor's battery.

Battery Maintenance and Storage

Electrical System Servicing

Main Fuse and Oil Level Check

Hydro Transmission and Hydraulic System Filter Changes

Hydro Transmission and Hydraulic System Oil Change

Wheel Lug Nut Torque and Tire Maintenance

ROPS Maintenance

Periodic inspection of the ROPS for damage and loose fasteners.

Tractor Storage

Engine Maintenance

Engine Cleaning and Oil Checks

Procedures for cleaning the engine, checking oil levels, and adding oil.

Changing the Engine Oil and Filter

Changing the Air Cleaner

Paper Air Cleaner Element and Spark Plug Service

Section 6: Mower Deck

Mower Deck Leveling Adjustments

Procedures for ensuring the mower deck is properly leveled for an even cut.

Setting the Cutting Height

How to adjust the mower deck's cutting height using caster wheel axles.

Removal of Deck

Section 6: Mower Deck (Continued)

Installing the Deck

Deck Maintenance

Deck Cleaning and Blade Care

Section 7: Specifications

Engine, Electrical, and Fuel Specifications

Transmission and Drive Specifications

Tractor Specifications (Continued)