Cub Cadet 7304 User Manual

S ERIES 7000
CUB CADET LLC P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 [www.cubcadet.com]
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning
: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved
forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark
arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective
working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public
Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the
muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box
361131Cleveland, Ohio 44136-0019.
Operator’s Manual
PRINTED IN U.S.A. FORM NO. 769-00654
(1/03)
COMPACT TRACTOR
MODEL 7304

Cub Cadet 7304 Specifications

General

Transmission	Hydrostatic
Drive System	2WD
PTO	Independent
Differential Lock	Yes
Power Steering	Yes
Brakes	Wet disc
Height	44 inches

Summary

RECORDING MODEL AND SERIAL NUMBER INFORMATION

IMPORTANT SAFE OPERATION PRACTICES

GENERAL OPERATIONAL SAFETY

Covers safe operation, slopes, and general hazards to prevent injury.

SPECIFIC SAFETY WARNINGS AND LABELS

Details safety for children, PTO, ROPS, and identifies key safety labels.

SECTION 1: CONTROLS AND FEATURES

OPERATOR CONTROL LOCATIONS

Identifies operator controls on the dash, fenders, and instrument panel.

SECTION 2: OPERATION

ENGINE STARTING, STOPPING, AND DRIVING

Step-by-step procedures for starting, stopping, and driving the tractor.

USING TRACTOR SYSTEMS AND ATTACHMENTS

Explains operation of transmission, PTO, hydraulics, and hitches.

SECTION 3: ADJUSTMENTS

OPERATOR AND IMPLEMENT ADJUSTMENTS

Instructions for adjusting seat, belt, hitch, and wheel alignment.

SECTION 4: MAINTENANCE

LUBRICATION AND SCHEDULED MAINTENANCE

Details lubrication schedule, capacities, and essential maintenance tasks.

DRIVETRAIN AND STORAGE PROCEDURES

Guidance on transmission, axle, drive shaft maintenance, and tractor storage.

ENGINE, FUEL, AND ELECTRICAL SYSTEMS MAINTENANCE

Covers engine oil, coolant, air cleaner, fuel filter, and electrical system service.

SECTION 6: SPECIFICATIONS

SECTION 7: OPTIONAL EQUIPMENT AND ACCESSORIES

LIMITED WARRANTY INFORMATION