Need help?Do you have a question about the Cub Cadet 71 and is the answer not in the manual?
Lock for the brake pedal.
Button to control the engine choke.
Combined pedal for clutch and brake operation.
Lever for selecting creeper drive speeds.
Lever for engaging/disengaging front PTO.
Lever for selecting transmission gears.
Switch for starting and operating the engine.
Handle for operating tractor attachments.
Mechanism to limit lift handle travel.
Button to control tractor lights.
Lever to control engine speed.
Instructions for lubricating the tractor.
Information on checking tire pressure.
Instructions for filling the fuel tank.
Controls engine speed for uniform operation.
Procedure to access engine and fuel tank.
Information on engine governor settings.
Step-by-step instructions for starting the engine.
Procedure for safely stopping the tractor.
Operation of the fuel shut-off valve.
Procedure for cleaning the fuel strainer.
Adjustments for engine carburetor settings.
How to adjust the carburetor's high-speed mixture.
How to adjust the carburetor's idle mixture.
Daily checks before operating the tractor.
How to adjust the tractor seat for comfort.
Operation of the combined clutch and brake pedal.
How to engage the brake lock for parking.
Function of the gearshift lever for transmission selection.
Operation of the creeper drive engagement.
How to use the creeper drive for slower speeds.
Step-by-step instructions for starting the tractor.
Procedure for safely stopping the tractor.
Details on brake pedal operation and safety switch.
Lever for selecting forward and reverse speeds.
Function of the release lever for moving the tractor.
Operation of the lift handle for equipment.
How to engage PTO when tractor is stopped.
How to engage PTO while tractor is moving.
How to engage/disengage the front PTO clutch.
Procedure for adjusting the front PTO clutch.
Steps for installing/removing drive belts.
Importance of air circulation for engine cooling.
Maintenance of the dry-type air cleaner.
How to clean the air cleaner element.
When and how to replace the air cleaner element.
Operation of the ignition switch.
Function of the safety starting switch.
How to operate the lighting switch.
How to use the cigarette lighter.
Maintenance and adjustment of the spark plug.
Adjusting ignition timing using breaker points.
Function of the motor-generator unit.
Checking and adjusting the motor-generator belt tension.
Role of the voltage regulator in charging rate.
Information about sealed-beam headlights.
Procedure for replacing the taillight lamp.
Location and replacement of the lighting fuse.
Maintenance and care of the tractor battery.
Precautions when working with battery and cables.
How to clean and service the battery.
How to adjust the front wheel toe-in for alignment.
How to ensure equal turning angles for wheels.
Details on rear tire sizes and types.
Recommendations for tire maintenance and care.
Importance of proper tire inflation.
Recommended tire pressures for various loads.
Use of rear wheel weights for traction.
Procedure for mounting tires on the rim.
Use of tire chains for added traction.
Procedure for adjusting the clutch mechanism.
Procedure for adjusting the brake mechanism.
How to adjust the brake for proper engagement.
How to adjust the speed control lever for neutral position.
Instructions for proper storage of the tractor.
Steps for taking the tractor out of storage.
Common causes and remedies for starting issues.
Troubleshooting engine running problems.
Diagnosing and fixing engine power loss.
Continued troubleshooting for engine power loss.
Causes and solutions for engine overheating.
Addressing tractor creeping when in neutral.
Engine oil type, level, and change intervals.
Replacement procedure for the transmission oil filter.
Table detailing lubrication points, intervals, and capacities.
Lubrication tasks to perform every 10 hours.
Lubrication tasks to perform every 30 hours.
Lubrication tasks to perform every 100 hours.
Lubrication tasks to be done periodically.
Table of capacities for fuel, oil, etc.
Speed ratings for the three forward gears and reverse.
Speed ranges for forward and reverse drive.
Electrical system details like voltage, battery, fuse.
Description of the foot brake type.
Details about the clutch type.
Information on tire sizes and wheelbase.
Overall dimensions, ground clearance, and turning radius.
Specifications for engine make, model, bore, stroke, speed.
Specifications for rear PTO shaft dimensions and speed.
To Next Page
General
