EasyManua.ls Logo

Cub Cadet 7264

Cub Cadet 7264
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CUB CADET LLC P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 [www.cubcadet.com]
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning
: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved
forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark
arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective
working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public
Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the
muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box
361131Cleveland, Ohio 44136-0019.
Operator’s Manual
PRINTED IN U.S.A. FORM NO. 769-00002
(5/02)
COMPACT TRACTOR
MODEL 7264
Question and Answer IconNeed help?

Do you have a question about the Cub Cadet 7264 and is the answer not in the manual?

Cub Cadet 7264 Specifications

General IconGeneral
BrandCub Cadet
Model7264
CategoryTractor
LanguageEnglish

Summary

IMPORTANT SAFE OPERATION PRACTICES

GENERAL OPERATION

Essential guidelines for safe tractor operation, including reading the manual and proper use of controls.

SLOPE OPERATION

Safety precautions and techniques for operating the tractor on slopes to prevent tip-overs.

CHILDREN SAFETY

Warnings and precautions regarding children in the operating area and their supervision.

OPERATING THE PTO

Procedures and safety measures for engaging and operating the Power Take-Off (PTO).

SAFETY FRAME (ROPS)

Information on the Rollover Protective Structure (ROPS) and its proper use and maintenance.

SERVICE SAFETY

Safety precautions related to handling fuels, cooling systems, and general maintenance.

SAFETY LABELS

SECTION 1: CONTROLS AND FEATURES

DASHBOARD AND FLOORBOARD CONTROLS

Identification and function of controls on the dash panel and floorboard.

INSTRUMENT PANEL OVERVIEW

Explanation of the gauges and indicator lights on the instrument panel.

FENDER MOUNTED CONTROLS

Identification and function of controls located on the tractor's fenders.

SECTION 2: OPERATION

ROPS OPERATION AND FOLDING

Guidelines for using the Rollover Protective Structure (ROPS) and how to fold it.

SAFETY INTERLOCK SYSTEM

Explanation of the tractor's safety interlock system and its functions.

FUELING THE TRACTOR

Procedures and safety warnings for fueling the tractor with diesel fuel.

NEW TRACTOR BREAK-IN PROCEDURES

Recommended steps for breaking in a new tractor to ensure optimal performance.

STARTING AND STOPPING THE ENGINE

Step-by-step instructions for starting, cold weather starting, and stopping the tractor engine.

DRIVING THE TRACTOR

General procedures and warnings for driving the tractor safely.

DRIVING ON SLOPES

Critical safety instructions for operating the tractor on inclines to prevent rollovers.

USING THE FORWARDREVERSE PEDAL

How to operate the hydrostatic transmission using the forward/reverse pedal.

USING THE HILO RANGE SHIFT LEVER

Instructions for shifting between high and low ranges for the transmission.

USING THE DIFFERENTIAL LOCK PEDAL

Explanation of the differential lock and its use for increased traction.

ENGAGING THE PTO

Step-by-step guide to engaging the Power Take-Off (PTO) system.

TRACTOR WEIGHTING

SECTION 3: ADJUSTMENTS

SECTION 4: MAINTENANCE

CHECKING TRANSMISSIONHYDRAULIC SYSTEM OIL LEVEL

How to check the oil level in the transmission and hydraulic system.

CHANGING TRANSMISSIONHYDRAULIC SYSTEM OIL

Procedures for draining and refilling the transmission and hydraulic system oil.

CHECKING OIL LEVEL IN FRONT AXLE AND FINAL REDUCTION GEAR CASES

How to check oil levels in the front axle and final reduction gear cases.

SECTION 5: ENGINE INFORMATION AND MAINTENANCE

CHECKING ENGINE OIL LEVEL

Steps to check the engine oil level using the dipstick before each use.

CHANGING THE ENGINE OIL AND FILTER

Procedures for changing the engine oil and oil filter at specified intervals.

CHECKING ENGINE COOLANT LEVEL

How to check the engine coolant level in the overflow reservoir and radiator.

SERVICING THE FUEL FILTER

How to check, drain, and replace the tractor's fuel filter and cup.

CHANGING THE FUEL FILTER

Procedure for replacing the fuel filter cartridge and bleeding the fuel system.

Related product manuals