Cub Cadet 7284 User Manual

SERIES 7000
CUB CADET LLC P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 [www.cubcadet.com]
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning
: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved
forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark
arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective
working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public
Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the
muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box
361131Cleveland, Ohio 44136-0019.
Operator’s Manual
PRINTED IN U.S.A. FORM NO. 769-01158
(3/04)
COMPACT TRACTOR
MODEL 7284

Cub Cadet 7284 Specifications

General

Engine Type	Diesel
Fuel	Diesel
Transmission	Hydrostatic
Gears	Infinite forward and reverse
PTO Type	Independent
PTO Speed	540 RPM
Hydraulic System	Open Center
3-Point Hitch	Category 1
Type	Tractor
Drive System	4WD
Height	86.6 in (220 cm)

Summary

Important Safe Operation Practices

General Operation Safety

Guidelines for safe operation, including reading the manual and operator responsibility.

Slope Operation Safety

Children Safety

Operating the PTO Safely

ROPS Safety

Service and Maintenance Precautions

Safety Labels

Section 1: Controls and Features

Dashboard and Floorboard Controls

Identification and location of controls mounted on the dashboard and floorboard.

Steering, Ignition, and Pedal Controls

PTO Switch and Throttle Operation

Differential Lock Pedal Operation

Instrument Panel Functions

Instrument Panel Gauges and Indicators

Understanding the gauges and indicator lights on the instrument panel.

Fender Mounted Controls and Features

PTO Reverse Override Switch

PTO Selection Lever

Selecting between rear, mid, or both PTO outputs.

Hydraulic Lift Lever Operation

Controlling the height and position of three-point hitch mounted equipment.

Transmission Hi/Lo Range Shift Lever

Auxiliary Hydraulic Control Handle

Foldable ROPS

Seat Belt Usage

Section 2: Operation

ROPS Operation and Folding

Guidelines for using the ROPS, including folding and unfolding procedures.

Folding the ROPS

Procedure for lowering the ROPS for low overhead clearance.

Safety Interlock System

Refueling the Tractor

New Tractor Break-In Procedures

Starting the Engine

Cold Weather Starting

Jump Starting the Engine

Using jumper cables to start the tractor if the battery is low.

Stopping the Engine

Driving the Tractor

Driving on Slopes Safely

Stopping the Tractor

Using the Forward/Reverse Pedal

Using the Hi/Lo Range Shift Lever

Using the Differential Lock Pedal

Using the Hydraulic Lift Lever

Using the PTO Selection Lever

Engaging the PTO

PTO Reverse Override Switch

Using the Three Point Hitch

Auxiliary Hydraulic Valve

Auxiliary Hydraulic Control Handle

Operating the auxiliary hydraulic control handle for attachments.

Tractor Weighting

Front Weights

Section 3: Adjustments

Adjusting the Seat

Adjusting the Seat Belt

Three Point Hitch Adjustments

Adjusting the linkage for the three-point hitch system.

Adjusting Front Wheel Toe-In

Adjusting the Brakes

Adjusting Hydraulic Lift Feedback Rod

Section 4: Maintenance

Lubrication Table

Table detailing lubricant types, capacities, and intervals for tractor maintenance.

Lubrication and Maintenance Chart

Battery Removal and Installation

Charging the Battery

Servicing the Electrical System

Checking Transmission/Hydraulic System Oil Level

Changing Transmission/Hydraulic System Oil

Initial Break-In Period Filter Change

Regularly Scheduled Oil Filter Changes

Checking Front Axle and Final Reduction Gear Cases Oil Level

Checking Front Axle Oil

Checking Final Reduction Gear Case Oil

Changing Front Axle and Final Reduction Gear Case Oil

ROPS Maintenance

Tire Maintenance

Wheel Bolt Torque

Tractor Storage Preparation

Section 5: Engine Maintenance

Checking Engine Oil Level

Adding Engine Oil

Changing Engine Oil and Filter

Checking Engine Coolant Level

Changing Engine Coolant

Changing the Air Cleaner

Draining the Fuel Filter

Changing the Fuel Filter

Section 6: Specifications

Engine Specifications

Transmission Specifications

Hydraulic Lift System Specifications

PTO and Hitch System Specifications

Limited Warranty

How to Obtain Service