Cub Cadet 7305

This manual provides comprehensive information on the operation, lubrication, and maintenance of your tractor.

Space to record tractor model name and serial numbers of major components.

Diagrams showing the locations for tractor, engine, and ROPS serial numbers.

Key precautions for safe operation, including personal attire and hazard awareness.

Essential safety practices like maintaining lights and securing the tractor.

Safety measures for PTO use, refueling, and handling batteries/electrical components.

Guidelines for safe driving, including posture, speed, and attachment use.

Safe operation on roads, slopes, and with attached equipment.

Explains important warning decals related to explosion, starting aids, and battery hazards.

Information on the Rollover Protective Structure (ROPS) and associated safety rules.

Details on using the foldable ROPS frame in normal and low clearance positions.

Step-by-step instructions for folding and securing the ROPS bar.

Detailed performance and component specifications for the diesel engine.

Specifications for the power train, including clutch, transmission, and PTO systems.

Key physical dimensions and weight of the tractor.

Explains tachometer, hourmeter, coolant, fuel gauges, and turn signals.

Operation of various levers and pedals for gear drive and hydrostatic drive systems.

Operation of starter, lights, signal, and horn controls.

Operation of gear, range, PTO, hitch, and draft control levers.

How to adjust the operator's seat and steering column.

Essential checks before starting, and procedures for engine startup.

Recommended run-in procedure and steps for stopping the engine.

Procedures and considerations for operating the tractor in cold ambient temperatures.

Guidelines for safely towing and transporting the tractor.

Detailed instructions for operating transmissions and PTO systems.

Safe operation of differential lock and implement controls.

Procedures for attaching implements using the drawbar and three-point hitch.

Information and procedures for adjusting three-point hitch components.

Operation of hitch control levers and remote hydraulic systems.

Specifications for tire inflation and load limits for various tire sizes.

Procedures for wheel mounting torques and front wheel toe-in adjustment.

Guidance on adding front end weights and rear wheel ballast for stability.

How to access the engine compartment and use the service lubrication chart.

Procedures for checking engine oil level and changing oil/filter.

Procedures for cooling system service and fuel filter maintenance.

Service for transmission and hydraulic fluids and filters.

Specifications and procedures for lubricating the front axle (MFD).

Cleaning the cooling system and adjusting/replacing the fan belt.

Procedures for adjusting clutch and brake pedal free play and travel.

Details on electrical components, specifications, and fuse functions.

Information on the charging system and proper battery maintenance.

Steps for properly storing the tractor for extended periods.

Procedures for preparing the tractor after storage for use.