F
fvaughanJul 31, 2025
What to do if the cutting attachment on my Cub Cadet CC 2025 will not advance?
- KKathy PowersJul 31, 2025
If the cutting attachment on your Cub Cadet Trimmer won't advance, there are several possible reasons. First, check if the cutting attachment is bound with grass and clean it if necessary. If the cutting attachment is out of line, refill it with a new line. An inner reel bound up may also be the cause, so replace the inner reel. If the cutting head is dirty, clean the inner reel and outer spool. If the line is welded, disassemble, remove the welded section, and rewind it. If the line is twisted, disassemble and rewind it. Finally, ensure enough line is exposed by pushing the bump knob and pulling out the line until 4 inches (102 mm) of line is outside of the cutting attachment.