Need help?Do you have a question about the Cub Cadet CC 3000 and is the answer not in the manual?
General| Starting System | Recoil |
|---|---|
| Engine Type | 2-cycle |
| Engine Displacement | 25 cc |
| Shaft Type | Straight |
| Engine | 25 cc |
Explains different safety alert levels (Danger, Warning, Caution) and their meanings.
Warns about chemicals in engine exhaust known to cause cancer or birth defects.
Crucial checks and precautions before starting the trimmer for safe operation.
Safety guidelines for handling fuel, operating the trimmer, and personal protective equipment.
Safety advice for storing, transporting, cleaning, and general unit care.
Identifies and explains key safety symbols and pictographs used in the manual.
Outlines the various uses and applications of the 2-cycle trimmer.
Identifies and illustrates the main parts and components of the trimmer.
Step-by-step guide for installing and adjusting the D-handle for optimal user grip.
Details the correct 40:1 fuel/oil mixing ratio and procedures for safe fuel preparation.
Information on using blended fuels, ethanol effects, and recommended fuel additives.
Detailed steps for starting the 2-cycle trimmer, including choke and primer use.
Procedures for safely shutting down the trimmer engine and stopping operation.
Guidance on how to hold the trimmer correctly for balance and efficient cutting.
Instructions on releasing and managing trimmer line length for optimal performance.
Best practices for efficient trimming, including cutting angles and decorative edging.
Outlines the regular maintenance schedule and required tasks for the trimmer.
Detailed instructions for installing new trimming line onto the spool.
Guides for winding trimming line, covering single line and SplitLine™ methods.
Steps for installing a pre-wound inner reel with new trimming line.
Where to find information on ordering replacement parts for the trimmer.
Procedure for cleaning and re-oiling the air filter to maintain engine performance.
Instructions for inspecting and cleaning the spark arrestor screen.
How to adjust the idle speed screw for proper engine idling and cutting attachment behavior.
Guide for removing, checking, and installing the spark plug for engine ignition.
Proper methods for cleaning, storing, and transporting the trimmer to prevent damage.
Solutions for common problems related to the engine failing to start or idle properly.
Addresses issues with acceleration, power loss, line advancement, and line control.
Detailed technical specifications for the engine, including type, displacement, and RPMs.
Technical details for the drive shaft, cutting mechanism, line spool, and cutting path.
Outlines the owner's responsibilities for maintenance and proper use to maintain warranty coverage.
Details the warranty period, coverage, and terms for engine emission control parts.
Visual guide showing the location of various engine parts with corresponding numbers.
A detailed list of engine part numbers and their descriptions for ordering.
Visual representation of boom and trimmer parts with numbered labels.
Comprehensive list of boom and trimmer part numbers and their descriptions.
Guidance on how to get service and limitations on warranty coverage for the product.
Details warranty terms, remedies, and how state laws affect warranty rights.
To Next Page
