Cub Cadet CC927LH

-
13-
oil inlet
oil inlet
BlADES
1. Please replace the blades if damaged or
worn seriously.
2. Please use the sharpener or le to grind
the cutting edges, referring to the angle in
the below picture.
3. Clean the blades after grinding and apply
the grease on the edges.
INTERVAL
ITEM
BEFORE OPERATION
DAILY INSPECT
EVERY
50 HRS
EVERY
100 HRS
EVERY
2 YRS
Check the bolt and nut,tighten up if necessary
Check for gas leak
Check and clean air cleaner
Check the cooling air intake port,cooling
ns,around muer
Check and clean spark plug
Check and clean fuel lter
Remove carbon deposits on muer and cylinder
Clean spark arrester
Replace spark plug
Replace fuel piping (fuel pipe,grommet)
Items with must be performed with proper tools,please do it with assistance of professionals
or authorized dealer.
REGULAR CHECK LIST