EasyManuals Logo

Cub Cadet CC927LH User Manual

Cub Cadet CC927LH
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
-
7-
FUEL AND OIL INSTRUCTIONS
WARNING
OIL
1. Only use high quality special oil for air cooled 2-stroke engine,JASO FC or FD, or ISO-L-EGC
or EGD oil. Never use water cooled engine oil or any oil for 4-stroke engine.
Fuel
1. Always use fresh, clean lead-free fuel. Minimum octane number: 90#.
Mixing Ratio
1. Recommended mixing ratio of fuel and oil is 50:1.
Warnings
1. Keep sparks and open ames at a distance from the area where you mixing the fuel or
lling the fuel tank with the mixture.
2. Do not mix the fuel and oil directly in the fuel tank; always use the mixing tank to do this
job.
3. Do not ll the fuel tank with too much mixture.Wipe up any spilled fuel from the unit
immediately.
4. Move the unit 5 meters away from the fueling source and site before starting the engine.
5. Never use fuel which has been stored for longer than 30 days. That may bring damage to
the unit, especially for the carburetor or the engine.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet CC927LH and is the answer not in the manual?

Cub Cadet CC927LH Specifications

General IconGeneral
BrandCub Cadet
ModelCC927LH
CategoryTrimmer
LanguageEnglish

Related product manuals