Cub Cadet Challenger 500 Service Manual

Engine
4‐34

Tighten the crankcase bolts (1) in a
cross pattern in stages.
10 Nm or 7 ft lbs

Apply sealant (4) to crankcase
bolt
(2) and install:
10 Nm or 7 ft lbs

Tighten the crankcase bolts (3).
26 Nm or 19 ft lbs
Left Crankcase
Right Crankcase
Installing the shift levers:

Shift lever 2 assembly (1)
14 Nm or 10 ft lbs

Shift lever 1
(2)
Note:
When installing the shift lever 1, align
the punch mark (a) on the shift lever 1
with the punch mark (b) on the shift
lever 2.
Caution:
Before installing and torque is applied,
be sure to check that the transmission
is functioning properly by rotating the
shift drum manually in both directions.

Cub Cadet Challenger 500 Specifications

General

Brand	Cub Cadet
Model	Challenger 500
Category	Utility Vehicle
Language	English