Cub Cadet Challenger 500 Service Manual

Chassis
5‐46
Adjusting the Gearshift Mechanism
Neutral (1)
High (2)
Low (3)
Reverse (4)
Select lever shift rod (5)
Shift control cable (6)
Note:
Before shifting you must stop the
vehicle and take your foot off the
accelerator pedal. Otherwise the
transmission may be damaged.
1. Adjustment
 Make sure the shift lever is in
the neutral position
 Loosen the locknuts (1)
 Adjust the shift rod length for
smooth and correct shifting.
 Tighten the locknuts.
Locknut
15 Nm (1.5 m · kg, 11 ft · lb)

Cub Cadet Challenger 500 Specifications

General

Brand	Cub Cadet
Model	Challenger 500
Category	Utility Vehicle
Language	English