Product Care 4
19
Maintenance Schedule
Before
Each use
Every 25 Hours Every 50 Hours Every 500 Hours After Mowing
Check gasoline level
P
Check hydraulic hoses for leaks
P
Check tires & tire pressure
P
Check deck, mower and hydro drive belts
P
Check blades and blade bolt tightness
P
Check safety switches for proper operation
P
Check uid level in transmission oil expansion reservoir
P
Check/Clean Engine Intake Screens & Cooling Fans *
P P
Check/Clean Exhaust Manifold, Muer Pipe & Muer Shields *
P P
Check/Clean Top & Underside of Deck, Under and Around Spindle Covers & Belt
Area *
P P
Check/Clean Around Fuses, Wiring and Wiring Harnesses *
P P
Check/Clean Around Transmission, Axle and Fans *
P P
Blow out/clean the pump control area under oor pan
P
Blow out/clean the pedal control area under the foot rest
P
Lubricate wear points (see chart)
P P
Clean engine cooling ns & external surfaces *
P
Change hydrostatic uid & lter in transaxles †
P
† — After first 300 hours, change hydrostatic fluid and filter in transaxles
* — Perform more frequently under dusty conditions.
To Next Page
Loading...
