Cub Cadet PRO Z 972 SDL

Safe Operation Practices • Assembly & Set-Up • Controls & Operation • Product Care
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
OperatOr’s Manual
Form No. 769-18490B
(May 28, 2021)
Safe Operation Practices ........................................ 2
Assembly & Set-Up .................................................. 8
Controls & Operation .............................................12
Product Care ...........................................................19
Replacement Parts ................................................ 28
Attachments & Accessories .................................. 28
Warranty .................................................................31
Table of Contents
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all
models and the model depicted may differ from yours.
Pro Z 900 Series
Steering Wheel

Cub Cadet PRO Z 972 SDL Specifications

General

Displacement	999 cc
Cutting Width	72 in
Deck Type	Fabricated
Transmission Type	Hydrostatic
Tires (Rear)	26 x 12-12
Seat Type	High-Back
Engine Type	V-Twin
Cutting Height	1.5-5 in
Transmission	Hydro-Gear
Turning Radius	Zero Turn
Wheelbase	60 in
Warranty	3 years
Engine	Kawasaki FX921V

Summary

Safe Operation Practices

Training and General Operation

Learn machine operation, safety rules, and understand controls.

Safety Warnings and Dangers

Heed all safety warnings, propositions, and danger alerts.

Slope Operation Safety

Operate carefully on slopes, avoid steep inclines, and follow specific mowing patterns.

Child Safety Precautions

Keep children away from the machine and never carry them.

Operator Protective System (OPS)

Understand and use the ROPS and seat belt for operator protection.

Safety Symbols Identification

Understand and follow all safety symbols for safe operation.

Assembly & Set-Up

Tractor Preparation and ROPS Installation

Steering Column and Seat Installation

Seat Adjustment for Ergonomics

Controls & Operation

Core Controls and Indicators

Understand ignition, throttle, PTO, drive pedals, hour meter, and fuel gauges.

Seat, Deck, and Auxiliary Controls

Lighting, Power, Safety Systems, and Starting

Operate lights, 12V outlet, safety interlocks, and start engine.

Driving, Turning, Slopes, and Mower Operation

Learn driving, turning, slope safety, and mower engagement.

Mower Deck Setup and Blade Types

Product Care

Maintenance Schedule Overview

Component Maintenance and Troubleshooting

Service, Electrical, and Tire Maintenance

Deck, Belt, and Blade Replacement

Limited Warranty