27Section 8 — troubleShooting
Problem Cause Remedy
The blades do not rotate/
blades stopped
1. Left deck fault.
2. Right deck fault.
3. Overload
4. Low battery.
5. Steering sensor fault.
6. Brake sensor fault.
1. Shut off and restart tractor. If problem
persists contact qualified service personnel.
2. Shut off and restart tractor. If problem
persists contact qualified service personnel.
3. Allow deck motors to cool. Raise deck height.
4. Return home, plug into charger.
5. Shut off and restart tractor. If problem
persists contact qualified service personnel.
6. Shut off and restart tractor. If problem
persists contact qualified service personnel.
The blades do not rotate in
reverse
1. Blades stopped
1. Restart blades. Make sure Reverse Caution
Mode is activated.
Reduced speed
1. Low Battery
2. Overload
3. Steering sensor fault.
4. Brake sensor fault.
1. Charge the battery as instructed in the
battery charger manual.
2. Raise deck.
3. Shut off and restart tractor. If problem
persists contact qualified service personnel.
4. Shut off and restart tractor. If problem
persists contact qualified service personnel.
To Next Page
Loading...
