Cub Cadet Z Force S 54

10 se c t i O n 2— as s e M b l y & se t -up
Remove the two shoulder bolts and lock nuts in the seat 2.

Rotate the seat into position and secure the seat into place 
with the previously removed shoulder bolts and lock nuts.


Adjusting the Seat
To adjust the position of the seat, push the seat adjustment lever

position; then release the adjustment lever. Make sure seat is

Install the Rear Hitch Bracket
Remove the hex flange screws and flange lock nuts that 
secure the hitch bracket and muffler mount bracket to the

Figure 3-3
Figure 3-4
Hex Flange
Screws
Flange
Lock
Nuts
Hitch
Bracket
Muffler Mount
Bracket
Figure 3-6
Figure 3-5