8
USING YOUR CUBII JR1+
Make sure to have followed all of the assembly steps in the Quick
Start guide before you begin using Cubii JR1+.
Positioning
The Cubii JR1+ can be used either in an upright position, such as
with an ofce chair, or in a more reclined position, such as when
used on a sofa.
• Cubii JR1+ occupies a oor area of 23.2” x 17.6” (0.59m x
0.45m). Please leave a clear zone behind the training area
that is at least 0.60m (24”). This zone must be clear of any
obstruction and provide the user a clear exit path.
• Find the seat conguration that suits you most. If you feel there
is not enough room between your knees and the desk, push
your Cubii JR1+ away from you and lower the chair height.
Keep your back straight, and do not slouch.
• If you are sitting on an ofce chair with wheels, use the chair
wheel stoppers. Place stoppers on the front casters to prevent
your chair from moving backwards when you pedal.
• For swiveling chairs with more than 4 casters, you may nd
it more convenient to use only one wheel stopper centered
close to the machine.
To Next Page
Loading...
