Cuddeback CuddeLink - Network Control Settings (Delay & Count)

15

Remote Menu Items
SETTING RANGE DESCRIPTION
CL MODE
OFF,HOME,
REMOTE,
REPEATER
OnecameramustbesettoHOME.All
othercamerasmustbeREMOTEor
REPEATER.
CL LOC 000thru999
ThisassignsaLOCATIONIDtoeachcamera.
Assigneachcameraauniqueidenficaon
number.
CL CHAN 1thru16
Everycameraonthenetworkmustbeset
tothe
samechannel.
CL DELAY
5secondsto1
hour
Controlshowoenimagesarequeuedto
send.
CL COUNT
ALL,25,50,100,
250
Setsthemaximumnumberofimagesthat
willbequeuedtosend.Deletestheoldest
imagestomakeroomforthenewest.
CL LEVEL
Signalstrength
‐‐to99
Usethis
toverifythecameraisonthe
networkandhowstrongthesignalis.
CL CLEAR NotApplicable
PressUPandallimagesqueuedtotransmit
willbeerased.
Cauon! Make absolutely sure of the following:
1. All your cameras* are set to the same CL CHAN
2. Each camera has a unique CL LOC number
3.
You have a CL LEVEL when you deploy a remote or
repeater.
*CamerasalsoreferstoRepeatersandHomePlus
16

CL MODE setsthecamera’sCuddeLinkmode.Choices
areOFF,HOME,REMOTE,REPEATER.PressUPor
DOWNtoselect,thenpressMOREtoconnue
programmingaddionalCuddeLinksengs.
OFF –usethisifyoudonotwantthiscameratobepart
ofaCuddeLinknetwork.TheCuddeLinkradiowillbe
disabled.
HOME –SetHomeonthecamerathatcollectsimages.
Only1cameracanbesettoHOME.
REMOTE –SetRemoteonthecamerasthattakepictures
andtransmitthepicturestotheHOMEcamera.
REPEATER –usethiswhenyouneedarepeaterto
transmitimages,butyoudonotwantthecamerato
recordimages.RefertoREPEATERseconlaerinthis
manual. 

CL LOC (LOCATION)assignsauniquenumbertoeach
cameraonthenetwork.Westronglyrecommendeach
camerahasauniquenumber.RefertoseconCAMERA
NAMINGforourrecommendaonsonhowtousethis
seng.

CL CHAN(CHANNEL)setstheradiofrequencythe
camerasusetotransmitimages.Allcamerasonyour
networkmustbesettothesamechannel.CuddeLink
has16availablechannelsnumbered1thru16.Youcan
chooseanynumberyoulike,butdonotchoosea
channelnumberusedbyanothernetworkinthe
immediatearea.