Cudy POE10 - Specifications

5
Specifications
Model
POE10
Number of channels
1 (PoE IN) into 1 (PoE OUT)
Pass-through data rates
10/100/1000 Mbps half/full duplex
Power over Ethernet input
Pin assignment and polarity:
Both 1/2 (-), 3/6 (+) and 4/5 (+), 7/8 (-)
Power over Ethernet output
Pin assignment and polarity: 1/2 (+), 3/6 (-)
Output power: up to 22W
Indicators
Power indicator: PoE enabled
Network indicator: Link/Act
Connectors
Shielded RJ-45, EIA568A and 568B
Network cables
Shielded category 5 (or higher)
Mounting
Wall or shelf
Environment
Indoor or outdoor
Operating ambient temperature
-10 to 45 °C
Operating humidity
Max. 90%, non-condensing
Storage temperature
-20 to 60 °C
Storage humidity
Max. 95%, non-condensing
Regulatory compliance
IEEE 802.3af (PoE), IEEE 802.3at (PoE+)
Dimensions
145×60×40mm