4
If your internet connection is through an Ethernet cable directly from the wall instead of
through NSL/Cable/Satellite modem, connect the Ethernet cable to the router’s WAN
port and skip steps 1, 2 and 3.
Connect your computer to the router (wired or wireless).
Wired: Turn off the Wi-Fi on your computer and connect it to router’s LAN port via an
ethernet cable.
Wireless: Connect your device to the router’s Wi-Fi using the SSID (network name) and
Password printed on the bottom of the router.
Launch a web browser and enter http://cudy.net/ or http://192.168.10.1/ in the
address bar. Use “admin” for password to log in.
Note: If the login windows does not appear, please refer to the FAQ.
Then the popup window will appear. Please follow step by step instructions to set up
the internet connections.
Note: If the popup windows does not appear, please click “Quick Setup” on the status
page.
You’re successfully connected co the internet!