CUGGL 2255279 - Fit and Adjust Canopy

-5-
3
Adjust Canopy
Pull the canopy away from the backrest to open(Arrow 1).
Push down the support plastic part on two sides into positions(Arrow 2).
Extend the canopy by unzipping the zip.
Fit Canopy
Slide the plastic part on the canopy onto the corresponding part on
the frame.
Attach the canopy press studs to the corresponding press studs on
both sides of the frame and the rear of the backrest.
Fasten the touch fasteners on both sides of the hood and seat.
4
2255279/3060827