The Cuggl Rowan Complete Pushchair is a stroller designed for infants from birth up to approximately 36 months, with a maximum weight capacity of 15kg. It is available in Rustic Blue (Cat No: 2255279) and Rose Tan (Cat No: 3060827). The pushchair complies with safety standard EN1888-1:2018+A1:2022.
Function Description:
The Cuggl Rowan Complete Pushchair serves as a portable transport solution for babies and toddlers. It features a robust frame with fabric, front and rear wheels, a canopy, a front bumper, a safety belt, a storage basket, and a brake lever. The pushchair is designed to be easily foldable for storage and transport.
Important Technical Specifications:
- Age Group: 0-36 months
- Weight Suitability: From birth up to 15kg
- Safety Compliance: Complies with EN1888-1:2018+A1:2022
- Product Weight: 9.0kg
- Product Unfolded Size: L77 x W52 x H106cm
- Folded Size: L34 x W27 x H106cm
- Maximum Permissible Loading for Shopping Basket: 3kg
Usage Features:
- Unfolding: To unfold the frame, locate the locking catch on the side of the stroller and lift it to release from the locking stud. Then, unfold the pushchair using both hands and press the locking bar until it "clicks" into place.
- Front Wheel Assembly: Press down the lock pin on the front tube and insert the front tube into the adaptor on the front wheel until the lock pin fully engages into the plastic hole, indicated by a "CLICK!".
- Canopy Installation: Slide the plastic part of the canopy onto the corresponding part on the frame. Attach the canopy press studs to the matching press studs on both sides of the frame and the rear of the backrest. Fasten the touch fasteners on both sides of the hood and seat.
- Canopy Adjustment: To open the canopy, pull it away from the backrest (Arrow 1). Push down the support plastic part on two sides into position (Arrow 2). The canopy can be extended by unzipping a zip.
- Front Bumper Assembly: Insert the front bumper bar into the openings on the front of the chassis until a "click" is heard. To remove, press the buttons on both sides.
- Harness & Buckle: The pushchair includes a restraint system with a crotch strap and waist belt. Shoulder straps can be threaded through loops to adjust height. To fasten the waist harness, insert both buckle clips into each side of the buckle until a "Click!" is audible. To release, squeeze the buckles and pull apart. Shoulder straps can be adjusted by moving the slides.
- Swivel Wheel Lock: The front wheels are swivel wheels. To lock them, rotate the wheel so the pedal faces forward, then press the pedal down with your foot until a "Click!" is heard. Minor rotation may be needed. To release, lift the pedal with your foot.
- Brake Operation: The stroller has a linked parking brake on the rear wheels. To engage, press down on the pedal with your foot. To release, lift the pedal with your foot. It is crucial to ensure brakes are engaged by rolling the stroller back and forth before letting go. Do not step on the steel bar to apply brakes.
- Backrest Recline: The backrest offers 3 positions: upright, semi-reclined, and full recline. Squeeze and hold the seat backrest adjustment lever, then move the seat unit up or down. Release the lever when the desired position is reached, and a "Click!" noise is heard. Always check the backrest is secure before placing a child in the pushchair.
- Footrest Adjustment: Press the button on both sides of the footrest simultaneously to adjust it to the desired position.
- Raincover Fit: Place the raincover over the hood and then cover the pushchair. Fasten the touch fasteners to the pushchair in positions A, B & C on both sides.
- Footmuff Fit: Place the footmuff onto the stroller, wrap the webbing around the frame, and secure it with the press stud. The top of the footmuff can be folded down over the bumper bar and secured by two hidden magnets.
- Folding the Stroller: Lift the rear locking catch upwards with your foot (1), then push the second locking clip down with your foot (2). The pushchair will begin to fold. Push the handles over, and the pushchair will naturally catch on the locking catch located on the side of the stroller (3).
Maintenance Features:
- Regular Checks: Regularly inspect the pushchair for worn parts, torn materials or stitching, loose screws, bent or broken frame parts, or any other damaged or missing parts. If any issues are found, do not use the product and contact customer service.
- Lubrication: Lubricate moving parts regularly, especially the wheels and lower parts of the chassis that tend to collect dirt.
- Fabric Cleaning: Fabric parts should be cleaned according to their care labels.
- Seat Cleaning: Sponge clean only.
- Footmuff Cleaning: Machine wash at a maximum temperature of 30°C.
- Canopy / Basket Cleaning: Hand wash only.
- Heat Exposure: Avoid exposing the pushchair to direct heat sources like radiators or direct sunlight.
- Salt Water Exposure: If chassis parts are exposed to salt water, rinse them with fresh (soapy) water as soon as possible.
- Storage: Do not fold or store the product while wet. Never store it in a damp environment, as this can cause mildew.
- Replacement Parts: Only use replacement parts supplied or recommended by the manufacturer/distributor.
- Hazards: Avoid placing the pushchair near naked heat sources (e.g., electric bar fires) or where a child could access other hazards.
Need help?
To Next Page
General
