3
4. Load freshly prepared cookie dough or filling into the unit
with a spoon or spatula.
NOTE: Do not fill the tube past the MAX fill line.
5. Align the long ridges on the inside of the tube with the
outside contours of the shaft disc. The arrow on the tube will
line up with the UNLOCK position on the motor body. Grasp
tube firmly and turn clockwise until the top arrow on the
tube lines up with the LOCK position. You will hear a click
when it is in the proper position (see Figure 5).
6. You are now ready to begin making cookies.
Figure 1
(Figure 1 inset)
Figure 2
(Figure 2 inset)
Figure 3
Figure 4
Figure 5
(UNLOCK)
(LOCK)
To Next Page
Loading...
Need help?
General
