2
IMPORTANT UNPACKING
INSTRUCTIONS
This package contains a Cuisinart
®
PrepExpress™
5-cup Slicer/Shredder/Spiralizer and the
accessories for it:
5-cup Work Bowl, Cleaning Brush, 2 Feed Tubes
and Pushers, 4 Cutting Cones, Base and
Instruction/Recipe Book.
CAUTION:
THE CUTTING CONES HAVE VERY SHARP
EDGES.
To avoid injury when unpacking the parts, please
follow these instructions.
1. Place the box on a low table or
floor next to the kitchen counter
where you’ll use the appliance.
Be sure the box is right side up,
then open the box.
2. Remove the Instruction Book
and the Angled Feed Tube
and Pusher.
3. Remove cardboard packing
materials and pulp molds, and lift
the unit out of the box. Remove
from plastic bag.
4. Remove the 5-cup Work Bowl
from the base of the unit, then
carefully remove the four
Cutting Cones from the
plastic bags in the bowl.
Be careful not to touch
sharp blades of Cutting
Cones.
5. Place the Work Bowl
back onto the base and
refer to the Instruction
Book for operating
directions.
6. Return cardboard, pulp molds
and all plastic bags to
the box in case shipping is
necessary in the future.
We recommend that you visit our website, www.
cuisinart.com, for a fast, efficient way to complete
your product registration.
Instruction Book
Angled Feed Tube
Pulp Mold
Housing/Base
Work Bowl &
Cutting Cones
Cleaning Brush
To Next Page
Loading...
Need help?
General
